Mods: Safe or Sorry?
Who doesn’t love mods (modifications) that increase horsepower and torque and/or fuel efficiency? Heck, I love mods! But has anybody ever thought, “wait a minute … if adding an airfoil Continue Reading
Installing a Pinion Seal into a GM 10 Bolt Rear
Tools Needed: 3/8″ Ratchet with medium extension and 11mm socket 1/2″ breaker bar with 1 1/4″ socket Hammer Chisel Large screwdriver or small pry bar Various other pry tools that Continue Reading
Adjusting Your Kick-Down Cable for Automatics (TPI Shown)
I figured I’d go ahead an post this little guide for those who still do not understand what’s involved in setting the kick-down cable for the automatic transmissions (700R4). The Continue Reading
Cleaning and Resetting Your Idle Air Control (IAC) Valve
What you will need for the following procedure is carburetor cleaner and a wrench big enough to remove the IAC valve. Ensure your ignition if OFF. Remove the connector to Continue Reading
Adjusting Your Minimum Air (or Idle Speed)
Before continuing, we recommend you clean your IAC valve. What you will need is a paperclip, torx screwdriver (T-25) to make adjustments and an accurate RPM gauge. If you can Continue Reading
Adjusting Your Throttle Position Sensor (TPS)
Before continuing, you should have cleaned your IAC valve and adjusted your minimum air (or idle speed). Otherwise your throttle response may suffer and have poor idle. This is to Continue Reading
1985 to 1990 Camaro IROC-Z Spotter’s Guide
Many thanks go to Jim Irace and Willie (Thirdgen.org History Moderator) for their help and contribution to this article. We’ve been wanting to do this for some time now, just Continue Reading
Buying a Used IROC-Z
So you’ve decided that you want an IROC, but now you don’t know what to look for, or how to determine sort of life this car has had to this Continue Reading